Reticulum
Please read the FCC rules. Reticulum radios are regulated by the FCC even though no license is required for 915 MHz LoRa. Know what is allowed before you transmit: FCC rules for Meshtastic, MeshCore and Reticulum (Part 15).
Reticulum is a different kind of mesh. It is not a chat app or one shared network. It is a networking toolkit that lets apps talk to each other over almost any link, including LoRa radio, Wi-Fi, Bluetooth and the internet, with no central servers.
- What it is
- How it works
- Compared with Meshtastic and MeshCore
- Getting started
- Ratspeak
- Apps
- Radios (RNode)
- In St. Paul
What it is
Think of Reticulum as the plumbing under a messaging system. Apps built on top of it send encrypted messages and files between people, and Reticulum figures out how to get them there over whatever connections are available. There is no DNS, no accounts, no phone numbers and no company in the middle. You create an identity on your own device, and that identity is a cryptographic key.
Reticulum is designed for slow, narrow and unreliable links, which is why it works well over LoRa radio. A message over LoRa is tiny and slow, but it can still arrive without any internet at all.
How it works
- Destinations, not IP addresses. Every endpoint is identified by a short cryptographic hash (16 bytes). There is no central address book.
- Announces. A device announces that it exists. Nearby transport nodes learn the next hop toward it and may repeat the announcement, so nobody needs a full map of the network.
- Encrypted links. To talk privately, two devices set up an encrypted session that can span one hop or many. Private messages are encrypted to the recipient, so the nodes carrying them cannot read them.
- LXMF messaging. LXMF is the messaging layer on top of Reticulum. It adds signed messages and propagation nodes, which hold messages for people who are offline (store-and-forward). Reticulum alone does not store messages.
- Many connection types. It runs over LoRa, serial links, packet radio, Wi-Fi, Ethernet, TCP, UDP, I2P and Bluetooth. You can mix them, and a device with a radio and an internet link can bridge the two.
- Small packets. The default packet size is 500 bytes, so large files are slow over radio.
Encryption is not anonymity. Timing, radio signals and mistakes can still reveal who you are, and a Reticulum link cannot cross a gap with no radio, cable or internet path. Some app features, such as hub-based group channels, can be read by the hub operator.
Compared with Meshtastic and MeshCore
- Different software, same kind of radio. Many LoRa boards that run Meshtastic or MeshCore can also run Reticulum’s RNode firmware, but only one firmware at a time.
- They do not talk to each other. A Reticulum node cannot send messages to a Meshtastic or MeshCore network, and the reverse. A radio running one cannot join the others’ channels.
- More of a toolkit. Meshtastic and MeshCore are ready-made networks you join, and our local channels are on the St. Paul page. Reticulum is a layer you build your own network with. It is more flexible, but there is more to learn.
Getting started
- Pick how you will connect. The easiest way to try it needs no radio: use the internet (TCP) or Bluetooth in an app. For a radio link, you need a LoRa board running RNode firmware (see below).
- Install an app. On Android, XPRS (from F-Droid) or Columba are good starting points. On a computer, try MeshChat or Sideband. See the app list.
- Add a connection. In the app’s network or interface settings, add a TCP hub, Bluetooth, or your RNode.
- Announce yourself and message someone. Share your address with a friend, or wait to see announces from others on the network.
- Read the manual. The official Reticulum site and its manual explain everything in detail.
Ratspeak
Ratspeak is a family of communication tools built on Reticulum. Its main product is an end-to-end encrypted messenger for desktop and mobile. You create an identity on your device, with no account or phone number, and connect over the internet, your local network, Bluetooth or compatible LoRa radios.
- What it does: private messaging, file sharing, group Channels, turn-based games and experimental voice calls.
- Where it runs: macOS (Apple Silicon and Intel), Windows, Linux and Android from its download page, plus an iOS beta. It also has handheld firmware for LoRa devices such as the LILYGO T-Deck Plus, the T-Pager and the Cardputer Adv.
- Under the hood: it runs on rsReticulum and rsLXMF, Rust versions of Reticulum and LXMF, so it works with other Reticulum apps.
- Be aware: Ratspeak says the app is in alpha, the handheld firmware is in beta, and voice is experimental. It is published under the Reticulum License. Its Channels connect through a hub that can read the room’s messages, so do not treat a Channel as private. Download only from the official links, because other copies of the code exist on GitHub.
- Learn more: Ratspeak documentation · source on GitHub.
Apps
Standard app stores (Google Play and the App Store)
Reticulum apps are mostly distributed outside the big stores. We could not find a Google Play or Apple App Store listing for the apps below, so we do not link one. Ratspeak lists an iOS beta, but its download page shows no public install link yet. Check ratspeak.org/download for the current iPhone status.
Ratspeak (iOS beta)
Messaging, file sharing and channels built on Reticulum. Lists an iOS beta, with no store link published.
Be careful of look-alike apps in the stores. Use the project links on this page instead of searching by name.
Free and open-source apps (F-Droid and other sources)
These are the best places to start. Apps from GitHub are installed from an APK file, which Android will ask you to allow once. Always download from the project’s own releases page.
XPRS
Off-grid messenger that routes over the internet, Bluetooth and a Reticulum overlay. BSD 3-Clause license. Connects to a few public Reticulum hubs by default, which you can change in Settings.
Columba
A native Android messenger and voice app for Reticulum. Works over Bluetooth LE, TCP and a LoRa RNode. AGPLv3. Currently in beta and installed from GitHub releases, not an app store.
Sideband
The original Reticulum messenger by Reticulum’s creator, Mark Qvist. Messages, voice, files, location sharing and maps on Android, Linux, macOS and Windows. Free, but its license (CC BY-NC-SA 4.0) is source-available rather than fully open source. It is intentionally not on app stores, so install the APK from GitHub and verify its signing certificate hash.
Reticulum MeshChat
A simple chat app for desktop, run on Windows, macOS, Linux or in Docker. Sends messages, files and audio calls and works with Sideband and Nomad Network. MIT license.
Nomad Network
A text-mode (terminal) messenger and page browser for people comfortable on the command line. Works with Sideband and MeshChat.
We checked each project’s own page for platforms, license and install method on November 17, 2026. These projects change quickly, so confirm the current version before you install.
Radios (RNode)
To use Reticulum over LoRa you need an RNode. RNode is an open radio design rather than one product, and it uses plain LoRa with no extra protocol layer (it is unrelated to LoRaWAN). Reticulum’s own manual lists supported boards, including several Heltec boards (T114, LoRa32 v3 and v4), LILYGO boards (T-Beam, T-Beam Supreme, T-Deck, T-Echo) and RAK4631-based boards. Install the firmware with the rnodeconf --autoinstall tool that comes with Reticulum. See Communications Hardware in the manual.
Use US frequencies. Some guides and apps show 868 MHz settings, which are for Europe. In the US, use a frequency inside 902–928 MHz, and read our FCC rules page first. Flashing RNode firmware replaces Meshtastic or MeshCore on that board.
Reticulum in St. Paul
We do not know of a local Reticulum network yet, so none is listed here. If you run a Reticulum node or want to start one, say hello in our Signal or Discord group or through the contact page.