Meshtastic

Please read the FCC rules. Meshtastic radios are regulated by the FCC even though no license is required. Know what is allowed before you transmit: FCC rules for Meshtastic, MeshCore and Reticulum (Part 15).

The larger and older of the two networks, with a wide choice of hardware and a polished phone app. Our local channel is West7th.

A small LoRa radio module with a spring antenna and colored wires held in a hand
Photo: LoRa module with antenna and SPI wires attached by Cnd (English Wikipedia), CC0 (public domain dedication), via Wikimedia Commons.
Network

Meshtastic

The larger and older of the two. Open-source firmware with a big hardware list, a polished phone app, public channels, and optional internet bridging (MQTT). Nodes can all relay messages, which works well for casual groups and quick setup.

  • Easy onboarding; most beginners start here
  • Default US channel is public and shared by many people
  • Private channels with your own encryption key
  • Heavy traffic in dense areas can congest the shared channel

meshtastic.org

Meshtastic: West7th

  • Region: US
  • Channel name: West7th
  • Key (PSK, base64):
    iM46Vru/iTYRJm4NaySSdIeFrOTPEglHjE5Am3sqh+w=
  • Modem preset: Medium Fast. New radios start on Long Fast (or Long Turbo, on some newer firmware), and neither can hear Medium Fast, so you must change it or you will not hear local nodes.
Step-by-step setup
  1. Install the app on your phone: App Store or Google Play.
  2. Flash the radio. On a computer, open flasher.meshtastic.org in Chrome or Edge. Plug the radio in with a USB cable that carries data (some charge-only cables will not work). Pick your device model, choose the latest stable firmware, and follow the prompts to flash. Attach the antenna before powering on.
  3. Connect your phone. Open the app, tap the connect (Bluetooth) option, and choose your radio. Enter the pairing PIN shown on the radio's screen. Radios with no screen usually use the default PIN 123456.
  4. Set the region. Go to Settings → LoRa (on iPhone: Settings → Radio Configuration → LoRa) and set Region to US.
  5. Set the modem preset. On the same LoRa screen, set Modem Preset to Medium Fast. Save, and let the radio reboot.
  6. Add the West7th channel. Go to Settings → Channels and add a channel. Name it West7th exactly (capitalization matters), paste in the key above, and save. Leave your primary channel as it is, because Meshtastic picks its radio frequency from the primary channel’s name.
  7. Test it. Open the West7th channel and send a message. Place the radio near a window or outdoors, high up with the antenna pointing up.

Menu names change between app versions. If something looks different, check the official docs at meshtastic.org.

Having trouble? See the FAQ and troubleshooting, the placement guide, and etiquette (including why to leave your node on the default Client role).

Meshtastic apps

The official Meshtastic app is how you pair with your radio, send messages, see the node list and map, and change settings.

Meshtastic (official)

Free. Works on phones and tablets. Pairs over Bluetooth with your radio.

Meshtastic Flasher (website)

Not an app. Use it on a computer in Chrome or Edge to flash firmware onto a radio.

The official app is open source. Community-made extras are listed in the next section. Store pages can change and some apps are updated or removed, so if a link fails, search the app name in your store.

Free and open-source extras for Meshtastic

The official apps below are open source themselves. These are community-made or companion tools that work alongside your radio.

Open source

Meshtastic (official, open source)

Both official apps are open source (GPL-3.0 on Android). On Android you can also install from F-Droid, which is free and ad-free.

Open source

Mesh+ for Meshtastic

A simpler, chat-focused alternative to the official Android app, MIT licensed. It can also relay SMS over the mesh for people you trust, which is off until you turn it on. Android only; there is no iOS version.

Open source, $0.99

Backtrail Pro

Open source (GPL-3.0) app for iPhone and Android that works with Meshtastic radios and with discontinued goTenna Mesh radios. It lists every node it hears and can change basic radio settings. Not free: it costs US$0.99.

Open source

Organic Maps

Free, open-source offline maps built on OpenStreetMap, with no ads or tracking. Good for scouting a node site and for finding your way when the cell network is down.

Open source

OsmAnd

Open-source offline maps with contour lines and terrain detail, which helps when judging line of sight. The free store versions limit some features; the F-Droid build is fully free.

Meshtastic Web and Site Planner

Not apps. Meshtastic Web is a browser client from the Meshtastic project, and the Site Planner estimates coverage from a spot you pick. Both are free to use in a browser.

iOS has far fewer open-source options than Android. On an iPhone, the official Meshtastic app (itself open source) is the best choice. Store pages can change and some apps are updated or removed, so if a link fails, search the app name in your store. F-Droid is a free app store for open-source Android apps. We are not affiliated with these projects.

Looking for a radio? See our recommended Meshtastic gear. The buttons on that page are Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you, and the commissions go toward putting more radios in the community’s hands. Receipts available on request. Disclosure.