Wi-Fi, Bluetooth & ESP32: it’s all radio

Every wireless thing you own is a radio. Your phone, Wi-Fi router, earbuds, car key and smart doorbell all send and receive radio waves. Understanding that opens up a world of cheap, legal and fun experiments.

All wireless is radio

Radio is any communication that travels as electromagnetic waves. AM and FM stations, ham radio, GMRS and mesh radios are the familiar kinds, but so is nearly every modern gadget. They differ in frequency (how fast the wave wiggles), power and the language (protocol) the two ends agree to speak.

TechnologyFrequencyTypical rangeUsed for
NFC / RFID tags13.56 MHz (and 125 kHz)A few centimetersTap-to-pay, transit cards, building badges
Garage and key remotes315 / 433 MHzTens of metersCar keys, doorbells, weather sensors
LoRa (mesh)902–928 MHzKilometersMeshtastic, MeshCore, sensors
Bluetooth2.4 GHzAbout 10–100 mEarbuds, watches, trackers
Wi-Fi2.4, 5 and 6 GHzAbout 30–100 m indoorsHome and office internet
Zigbee / Thread2.4 GHzTens of meters, meshedSmart-home lights and sensors
GPS1.2–1.6 GHzFrom orbitLocation (receive only)

Most of these run without a license under the FCC’s Part 15 rules: devices must be certified, must not cause harmful interference, and must accept interference from others.

Wi-Fi

Wi-Fi is a radio link between your devices and a router. On 2.4 GHz it reaches farther and passes through walls better; on 5 and 6 GHz it is faster but shorter-range. Neighbors’ networks share the same channels, which is why apartment Wi-Fi can be crowded. Picking a less busy channel is a real radio skill.

Bluetooth

Bluetooth is short-range radio on 2.4 GHz that hops between channels many times a second to dodge interference. Classic Bluetooth carries audio to earbuds and speakers. Bluetooth Low Energy (BLE) sends tiny packets using very little power, which is why a coin cell can run a tracker tag or fitness band for months. The Meshtastic and MeshCore apps use BLE to talk to your radio.

ESP32: a radio lab for about $5

The ESP32 is a family of tiny, inexpensive computer chips from Espressif with Wi-Fi and Bluetooth built in. On a development board with a USB port, it becomes a programmable radio you can plug into a laptop and start experimenting with in minutes. Many Meshtastic radios, like the Heltec V3, are simply an ESP32 paired with a LoRa chip.

Getting started

  1. Get a board and a USB cable that carries data (many charge-only cables don’t). See kits below.
  2. Pick a tool. For code, install the free Arduino IDE and add ESP32 support (step-by-step guide). For no-code projects, use ESPHome in your browser or WLED.
  3. Upload “Blink”, the hello-world of hardware, to prove everything works. Getting started with the ESP32 walks through it.
  4. If the computer can’t see the board, install the USB driver for its chip (CP210x or CH340), try another cable, or hold the BOOT button while uploading.

Beginner projects

Control a light from your phone

Turn the ESP32 into a tiny Wi-Fi web server and switch an LED from any browser on your network.

Board-to-board messaging with ESP-NOW

Two ESP32s talk directly, with no router at all. A great way to see how a mesh works, in miniature.

Your first Bluetooth Low Energy device

Make the ESP32 advertise a sensor reading over BLE and read it from your phone.

Mini weather station

Read temperature, humidity and pressure from a BME280 and show it on a web page.

Wi-Fi scanner and signal meter

List nearby networks and their signal strength, then walk around to see how Wi-Fi fades through walls.

Smart LED strip with WLED

Flash free WLED firmware from a browser and control an LED strip with a phone app. No code needed.

Home sensors with ESPHome

Build sensors for Home Assistant by writing a short settings file instead of code. Install from your browser.

Try it with no hardware

The free Wokwi simulator runs ESP32 projects in your browser, wires and all.

Build a mesh radio

Many Meshtastic radios are just an ESP32 with a LoRa chip. Flash one and join the Saint Paul mesh.

Legal experiments to try

Radio is best learned by measuring it. All of these stay within the rules because they use your own devices, listen passively, or use certified hardware as intended.

The rules: what not to do

Want to transmit with more power and fewer limits? That’s what a ham radio license is for.

Kits and boards

These are Amazon affiliate links. Every affiliate purchase helps the St. Paul Radio Authority provide radios to the community at no cost, and receipts are available on request. See our disclosure.

ESP32 dev boards (multi-pack)

Classic ESP32-WROOM boards with Wi-Fi and Bluetooth. Buying a few lets you try board-to-board projects.

Look for USB-C and the CP2102 or CH340 USB chip.

See on Amazon →

ESP32-S3 dev board

Newer and faster, with more memory and native USB. The chip used in many Meshtastic radios.

See on Amazon →

ESP32-C3 SuperMini

Thumbnail-size and cheap. Great for tiny sensors.

See on Amazon →

ESP32-C6 dev board

Adds Wi-Fi 6 plus Zigbee and Thread radios for smart-home experiments.

See on Amazon →

ESP32 starter kit with tutorials

A board, breadboard, sensors, LEDs and wires with a project book. The easiest all-in-one start.

See on Amazon →

LILYGO T-Display-S3

An ESP32-S3 with a bright color screen built in, for gadgets that show information.

See on Amazon →

BME280 sensor modules

Temperature, humidity and pressure sensor for weather-station projects.

See on Amazon →

Breadboard and jumper wire kit

Solderless prototyping. Every project above uses it.

See on Amazon →